Dry erase wallcovering magnetic

Opti-Rite^® 2
Magnetic Receptive White Dry Erase Wall Covering Materials

Opti-Rite® 2 Magnetic Receptive, Non-Projection, Wall Covering

Opti-Rite® 2 is is a magnetic receptive dry erase wall covering that will accept light magnetic accessories such as data card holders and magnetic shapes and indicators. Dry erase wallpaper an entire wall, training or conference room with walls you can write on!

Comes in 5 different sized dry erase rolls, See pricing below. Custom sizes are available and can be ordered through our customer service reps toll free at 866-366-1500.

Order Code

Roll Size

Cost / Roll

OMI-77-500-06	4' x 6'	$228.00
OMI-77-500-12	4' x 12'	$434.00
OMI-77-500-25	4' x 25'	$864.00
OMI-77-500-50	4' x 50'	$1,728.00
MI-77-500-75	4' x 75'	$2,458.00

97-50000	Semi-Permanent Adhesive 1 U.S. Gallon	$49.00
97-70000	Semi-Permanent Adhesive 4 U.S. Gallons	$150.00

Click here for Installation Instructions. After installation you need to wash the surface thoroughly before use. Use a good quality non-abrasive household cleaner like glass cleaner and rinse well with clean water. Dry with a soft towel and be sure material is completely dry before using.

Custom cut lengths available... Call customer service for assistance. All Opti-Rite® Custom Orders are cut to your specifications and are NOT returnable once applied to the wall. Custom cut lengths are not returnable in any case.

Opti-Rite® 2 whiteboard wall covering material is 12 micron ETFE film covering a PVC sheet with a ferrous powder kneaded PVC sheet for magnetic applications. Think of Opti-Rite® 2 as whiteboard wallpaper that will accept light magnetic accessories! The ferrous powder makes the material act like metal.

Electrical Shock Warning: Opti-Rite® 2 dry erase wall covering can act as a conductor of electricity due to the ferrous content! Do not allow this material to come into contact with any exposed wires and be extremely careful around electrical outlets or circuits during installation.

Our adhesive is a semi-permanent adhesive. You may damage your dry walls removing the product at a later date. If you are concerned about being able to remove the Opti-Rite® at a later date we suggest using a Heavy Duty Clay or Clear Strippable Adhesive available at any local paint and wall paper outlet. 1 Gallon should cover 200 - 250 square feet of material.

Opti-Rite® is a registered trade mark of OptiMA Inc.

[Back to Resurfacing Options]

CRM Software by Boldcenter
*If your order must ship by truck we have a shipping fee of $100.00 within the continental U.S.