Each conference room cabinet has a 4' x 4' white porcelain steel, magnetic
receptive dry erase board in the back of the unit. There is satin anodized
high profile trim around the perimeter of the conference cabinet that will
give the unit some depth and rigidity.
The
conference cabinet is about 70 pounds uncrated which is much lighter than our
contemporary and tradition oak conference cabinets. The unit is hung with
Z-Bracket Crestline trim on the back of the cabinet and along the bottom with
L-clips.
The two doors are constructed of 1/2" fiber board core with white porcelain
steel, magnetic receptive dry erase board on the inside and a brushed aluminum
laminate on the outside of the panel. Open the conference room cabinet doors
fully to produce almost a full 4' x 8' wide magnetic dry erase writing
surface.
Because the interior of the doors is a magnetic receptive dry erase panel
there is no need for a bulletin board... you simply use magnets to hold up
your private notices, etc. The conference room cabinet doors are hung on
full-length, heavy duty piano hinges and the doors will be secured closed with
a concealed, magnetic latching system on the inside.
The outside depth of the unit is just over 2¼" giving this conference room
cabinet a very sleek and slim look. However, due to the thin design this
enclosed executive whiteboard conference room cabinet does not lock and does
not hold a flip chart.