Dry
erase wall covering material on a roll. What a neat idea. Now you
can virtually turn any smooth surface into a dry erase writing surface.
We offer a number of different styles to select from.
There are plain dry erase wall coverings, magnetic receptive dry erase wall
covering, low gloss dry erase wall covering materials and a dry erase writing
surface with a ghost grid on it.
Opti-Rite®
1
Non-magnetic, bright white dry erase wall covering that is a non-projection
dry erase writing surface.
Opti-Rite®
1
is 48" wide and comes in rolls up to 100' long. This material is too bright
to project on but makes a great writing surface and can be used to create
full-height dry erase walls.
Opti-Rite®
2
is a magnetic receptive,
plain white dry
erase wall covering that is also a bright white, non-projection writing
surface. There is a ferrous powder in the material that will allow you to
use light magnetic accessories. This dry erase wall paper is 48" wide
and comes in rolls up to 75' long.
Opti-Rite® 4
is a bright white, non-magnetic dry erase
wall covering with a white on white grid pattern of approximately 2" x 2".
The actual grid is 5cm x 5cm. The perfect dry erase board for
engineers and teachers and those of us who cannot draw or write in a
straight line without a ruler.
Opti-Rite®
5
is a low gloss, non-magnetic receptive dry erase wall
covering material that can be written on with dry erase markers and
projected at the same time.
Opti-Rite®
5
comes 3 ways. There
is as a 50" and a 60" wide roll and both requires adhesive and a
50" self-adhesive model for resurfacing existing boards.
Click here for
Installation Instructions.
After installation you need to wash the surface thoroughly before use. Use a
good quality non-abrasive household cleaner like glass cleaner and rinse well
with clean water. Dry with a soft towel and be sure material is completely dry
before using.