These whiteboard skins are a 24 gauge porcelain on steel, dry erase board panel with a strong peel-n-stick backing. The adhesive on these skins is extremely strong once it sets up. Removing them from dry walls will require extensive repair to the dry wall surface. However, being a porcelain steel panel, the writing surface will last for a very long time and should not need to be replaced.
These whiteboard skins make an excellent replacement surface for old worn out dry erase boards or chalkboards. We custom cut each panel to match your existing board dimensions at the factory for a perfect fit every time. The pricing on the peel-n-stick skins below shows that we can cut the height of the board from 48" down to what ever height you may need and we offer different length skins up to 12'. You can butt two or more panels up tightly together and we also offer a white painted T-trim which can be written on with a dry erase marker. Use the comments box found in the shopping cart during check out to tell us what sizes you need your panels.
Click here for additional installation and
measuring instructions
High Gloss 208S Whiteboard Panels
| Stock # | Panel Size | Price |
| BR-208-402 | Up to 2' High x Up to 4' W (8 Sq. Feet - Minimum Charge for this size or smaller)* |
$82.00 |
| BR-208-404 | Up to 4' H x Up to 4' W | $146.00 |
| BR-208-405 | Up to 4' H x Up to 5' W | $182.00 |
| BR-208-406 | Up to 4' H x Up to 6' W | $219.00 |
| BR-208-408 | Up to 4' H x Up to 8' W | $276.00 |
| BR-208-410 | Up to 4' H x Up to 10' W | $345.00 |
| BR-208-412 | Up to 4' H x Up to 12' W | $414.00 |
 | ||
| Stock# | Painted T-Bar Trim Molding Size | Price |
| BR-80TM-1 | White Cover Bar Sold by the foot | $6.35 |
| BR-80TM-2 | 2' Pre-Cut Section of T-Bar Trim | $12.70 |
| BR-80TM-4 | 4' Pre-Cut Section of T-Bar Trim | $25.40 |
| BR-80TM-6 | 6' Pre-Cut Section of T-Bar Trim | $38.10 |
| BR-80TM-8 | 8' Pre-Cut Section of T-Bar Trim | $50.80 |
|
| ||
| Stock# | Weighted Application Tool | Price |
| BR-545 | Peel-N-Stick Installation Roller Application Tool | $83.00 |
|
| ||
We also offer the weighted installation roller application tool. You will need a smooth weighted roller to remove all of the air
from behind the panels and to insure a secure and snug adherence.
